37
Additional accessory information
Item
Description
Monitor If you use a nonstandard monitor,
you may need to change the
Windows 2000 display settings to
achieve the proper resolution for
your monitor.
Printer Connect an external printer to the
Centronics parallel port connector
directly. If your printer has a DB-
25 connector, use the adapter
cable that came with your printer.
For information on printer usage,
see Using Print Screen.
Rackmount For installation information, refer
to the instructions that came with
your rackmount kit.
Other Refer to the Readme file on the
TDS5000B Series Product
Software CD for possible
additional accessory installation
information not covered in this
manual.
To Next Page
Loading...
Need help?
General
