47
Configuration
CONSOLE GENERATED PTT
The Console Generated PTT section is used to set up microphone selection when PTT is generated from the console position.
Up to four (4) different microphone sources can be set up for a console generated PTT. When the console operator performs a
PTT from the C-Soft console, the first available microphone source that is not disabled or disconnected, is selected for
transmission in the order set up in this section.
The default for these fields are:
Headset Mic #1
RHB 1 #2
RHB 2 #3
Desk Mic #4
EXAMPLE: When the defaults are set, the audio is routed as follows:
If a headset, and RHB 1, and RHB 2 and desk mic are connected, and a PTT is generated from C-Soft, audio
is routed to the headset’s earpiece.
If an RHB 1, an RHB 2, and a desk mic are connected, and a PTT is generated from C-Soft, audio is routed
to RHB 1.
If an RHB 2 and a desk mic are connected, and a PTT is generated from C-Soft, audio is routed to the
RHB 2.
Headset Mic #1–#4 Radio Buttons
The Headset Mic #1–#4 radio button indicates the priority for routing audio through the (controller) headset when a PTT is
generated from C-Soft.
Headset Mic Disable Radio Button
The Headset Mic Disable radio button indicates the headset is ignored when a PTT is generated from C-Soft.
RHB 1 Mic #1–#4 Radio Buttons
The RHB Mic #1–#4 radio button indicates the priority for routing audio through the RHB 1 when a PTT is generated from
C-Soft.
RHB 1 Mic Disable Radio Button
The RHB 1 Mic Disable radio button indicates the RHB 1 is ignored when a PTT is generated from C-Soft.
RHB 2 Mic #1–#4 Radio Buttons
The RHB 2 Mic #1–#4 radio button indicates the priority for routing audio through the RHB 2 when a PTT is generated from
C-Soft.
RHB 2 Mic Disable Radio Button
The RHB 2 Mic Disable radio button indicates the RHB 2 is ignored when a PTT is generated from C-Soft.
Desk Mic #1–#4 Radio Buttons
The Desk Mic #1–#4 radio button indicates the priority for routing audio through the desk mic when a PTT is generated from
C-Soft.