Tempest 900 - Page 37

31
Tempest900 2-Channel Operating Manual
Adjusting Network Number and Lockout Key
The Network Number and Lockout Key settings can be adjusted from the BaseStation, under the “Radio Conguration” section of the Tech
Menu. Any adjustment to the Network Number and/or Lockout Key will require corresponding BeltStations to be re-paired with updated
BaseStation.
• Press MENU and select “BaseStation Settings.”
• Using the Volume control, scroll to and select “Tech Menu.” Proceed through warning.
• Select “Radio Conguration,” then “Network Number.”
• Use the Volume control to adjust the value and press ENT to save.
• Press MENU to escape one level and select “Lockout Key” to adjust the Lockout Key.
• Use the Volume control to adjust the value and press ENT to save.
• Press MENU repeatedly to escape to the Operation screen.
Updating Network Numbers and/or Lockout Keys will require corresponding BeltStations to be re-
paired to the updated BaseStation.
s