73
Tempest900 2-Channel Operating Manual
System Features
• All digital, frequency hopping spread spectrum technology - no frequency coordination needed
• 900MHz offers World-Wide operation with no licensing requirements in most world-wide locations
• Accu Sync™ timing system for improved performance with multiple BaseStations
• iSelect™ On-Command roaming
• Two intercom channels and up to 5 full duplex BeltStations per BaseStation in Normal Mode
• Congure up to 5, 900MHZ BaseStations with 25 full duplex BeltStations in a single system when operating in Normal Mode
• An unlimited number of BeltStations per BaseStation in Shared and Split Mode
• BeltStations can access both intercom channels in “Dual-listen” or “Single-listen” mode
• Weather resistant BeltStations
• BeltStations can send and receive “Call Alert” signal from wired intercom systems
• Silent vibrate mode on BeltStations
• Both “Stage Announce” and GPO Relay function available for each BeltStation
• Talk switches can be de-latched via the Mic Kill feature from either the BaseStation or the hard wire intercom
• Auxiliary audio input and output
• Program Volume control allows user to set volume of incoming program audio
• LAN control interface
• Electret or Dynamic Mic auto select
• Multiple antenna connection options
• Compatible with Clear-Com®, RTS®, Telex®, and other 2-Wire and 4-Wire intercom systems
To Next Page
