EasyManua.ls Logo

Tempest 900 - Default Settings

Tempest 900
94 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
71
Tempest900 2-Channel Operating Manual
Default Settings
BaseStation Defaults BeltStation Defaults
Headset Sidetone: -18 dB Headset Sidetone: -18 dB
Headset MIC gain: +6 dB / +22 dB Headset MIC gain: +6 dB / +22 dB
Electret: +6 dB Electret: +6 dB
Dynamic: +22 dB Dynamic: +22 dB
LCD Contrast: 30 Low Battery Alert: Enable
LCD Backlight Brightness: 80 LCD Back Light: Enable
LED Brightness: 40 Talk LED: Medium
Headset Talk Button: Latch Talk Buttons: Latch
Set Base as Master: OFF Security: Disable
Front Panel Lock: OFF Lock Keys: OFF
Wired intercom levels In/Out: Volume Limits:
2-Wire: -1.5 dB (IN) / -1.5 dB (OUT) Min Volume: OFF (0)
4-Wire: -9 dB (IN) / +3 dB (OUT) Max Volume: 25
Aux Out: OFF Call Alert: Both
S/A Audio: -12 dB Call Button: Enable
S/A Relay: Enable Select Relay: None selected
Security: Disable Relay Button: None selected
Frequency Band: 902-928Mhz S/A Audio: Momentary
Display Slot Assignment: Dynamic S/A Relay: Enable
TCP/IP Mode: DHCP Client Wireless ISO: Enable
Echo Cancellation: ON Volume Press: Disable
Mic Kill Settings: Enable All Talk Tones: Enable
Call Settings: Enable All Delay Switch: Disable
Program Volume: Off

Table of Contents

Other manuals for Tempest 900