Tenda 11AC - Page 68

61
---End
Parameter description
Parameter
Description
Enable Wireless
It specifies whether to enable the wireless function of the AP.
Country/Region
It specifies the country or region where the AP is used. This parameter helps comply with channel
regulations of the country or region. The default value is China.
Network Mode
It specifies the wireless network mode of the AP. Available options include 11b/g/n mixed, 11b, 11g,
11b/g/n mixed. This parameter can be set if Channel Lockout is not selected.

11b: The AP works in 802.11b mode and only wireless devices compliant with 802.11b can connect
to the 2.4 GHz wireless networks of the AP.

11g: The AP works in 802.11g mode and only wireless devices compliant with 802.11g can connect
to the 2.4 GHz wireless networks of the AP.

11b/g: The AP works in 802.11b/g mode and only wireless devices compliant with 802.11b or
802.11g can connect to the 2.4 GHz wireless networks of the AP.

11b/g/n: The AP works in 802.11b/g/n mode. Wireless devices compliant with 802.11b or 802.11g
and wireless devices working at 2.4 GHz and compliant with 802.11n can connect to the 2.4 GHz
wireless networks of the AP.

11a: The AP works in 802.11a mode and only wireless devices compliant with 802.11a can connect
to the 5 GHz wireless networks of the AP.

11ac: The AP works in 802.11ac mode and only wireless devices compliant with 802.11ac can
connect to the 5 GHz wireless networks of the AP.

11a/n: The AP works in 802.11a/n mode and only wireless devices compliant with 802.11a or
802.11n can connect to the 5 GHz wireless networks of the AP.
*
*
*