Tenda 11AC User Manual

69
---End
Parameter description
Parameter
Description
WMM Settings

Enable: It is used to enable the WMM function.

Disable: It is used to disable the WMM function.
WMM Optimization
Mode
It specifies the WMM optimization modes supported by the AP:

Optimized For scenario with 1 - 10 users: If 10 or less clients are connected to the AP, you are
recommended to select this mode to obtain higher client throughput.

Optimized For scenario with more than 10 users: If more than 10 clients are connected to the AP,
you are recommended to select this mode to ensure client connectivity.

Custom: This mode enables you to set the WMM EDCA parameters for manual optimization.
No ACK
If the check box is selected, the No ACK policy is adopted.
If the check box is deselected, the Normal ACK policy is adopted.
EDCA Parameters
For details, refer to section 7.4.1 Overview.

Tenda 11AC Specifications

General

Brand	Tenda
Model	11AC
Category	Wireless Access Point
Language	English