87
Step 5 Click Save.
---End
Setting Time and Date Manually
You can manually set the system time of the AP. If you choose this option, you need to set the system time
each time after the AP reboots.
Configuration procedure:
Step 1 Choose Tools > Date &Time > System Time.
Step 2 Enter a correct date and time, or click Synchronize with PC Time to synchronize the system time of
the AP with the system time (ensure that it is correct) of the computer being used to manage the AP.
Step 3 Click Save.
---End
c
To Next Page
Loading...
Need help?
General
