Operations Manual United Kingdom 1-June-2014
TA9 & 10 Tier 4 Page 7 - 5
Standard Operating Procedures 7
(4) Seat belt
Refer to Figure 7.6. Sit on the seat, place the seat belt across the hips and insert the latch (3)
into the buckle (1) until it locks into position.
Adjust by pulling the belt through buckle (B) until it is a firm, comfortable fit across the hips.
To remove the seat belt, press the button (2) and lift the latch (3) out of the buckle (1).
Figure 7.6. - Seat Belt
1.Buckle
2.Button
3.Latch
bWARNING
You must wear the seat belt at all times when operating this machine. Examine the belt for
damage and correct operation each time you use the machine. Failure to wear a seat belt or keep
the belt in good working order may result in death or serious injury.
To Next Page
Loading...
Need help?
General
