Operations Manual United Kingdom 1-June-2014
TA9 & 10 Tier 4 Page 10 - 1
Troubleshooting 10
10. Troubleshooting
10.1 General Troubleshooting
(1) Engine will not start
Check fuel level.
Incorrect type or grade of fuel.
Fuel supply pipe blocked.
Below starting limit temperature for machine
Check electrical supply (see Electrical Troubleshooting).
Air filter blocked.
Leak in fuel injection line.
Engine electronics prevent starting.
(2) “Low” engine oil pressure light comes on
Low engine oil level.
Consult dealer before using the machine.
(3) “High” coolant temperature light comes on
Check if fan belt is loose or missing.
Check coolant level on header tank (Do NOT add coolant until system is cold).
(4) Loss of coolant
Loose hose clips
Split coolant hose.
Radiator leaking.
10.2 Electrical Troubleshooting
(1) Circuit breaker keeps “tripping out”.
Check wiring for damage and short circuits.
Check beacon socket (if the rubber cover is split or fitted incorrectly water can enter).
(2) System Dead
Check battery isolator is set to “ON”.
Check battery connections.
Battery defective or discharged (flat).
Check circuit breaker has not “tripped”.
(3) Charge warning light remains On with engine running
Check if fan belt is loose or missing.
To Next Page
Loading...
Need help?
General
