Standard Operating Procedures 7
1-June-2014 United Kingdom Operations Manual
Page 7 - 10 TA9 & 10 Tier 4
(2) To Lower the Skip
7.12 Parking the Machine After Use
At the end of the working day make sure the machine is parked safely and securely.
PROCEDURE
1. When the load has been discharged.
2. Move the control lever towards the back of the machine (B).
3. The skip will lower.
PROCEDURE
1. Find a safe flat well lit area to park the machine where it will not cause an obstruction or
danger to others.
2. Stop the machine and apply the parking brake.
3. Set the Forward/Reverse switch to Neutral
4. Set the gear selector lever to neutral.
5. Stop the engine and remove the start key.
6. Access the engine bay, turn the battery isolator to OFF and remove the isolator key.
7. Close the engine bay door, lock and remove the key.
To Next Page
Loading...
Need help?
General
