4 Operation
TC29
34
4.3 Driver's seat
The comfort seat meets international quality and
safety standards (Fig. 13).
1. Horizontal adjustment of seat
2. Seat back inclination adjustment
3. Handle for weight adjustment
• 9-setting weight adjustments (10 kg each).
• Move the weight adjustment handle
clockwise until the stop; the weight
adjustment switches automatically to the 50
kg position.
4.4 Heating / Ventilation
Heating
• Before the heater is switched on, the "engine
compartment" hot water supply (14/1) must be
turned on.
• The heater, which is connected to the coolant
circuit, is operated using the switch (15/30).
• The hot air is distributed and aimed as desired
via a front windshield nozzle in the pedal
console and by adjusting the air vent on the
seat console.
Ventilation
• In ventilating mode, the hot water supply (14/1)
remains turned off.
• The fan is operated using the switch (15/30).
• The air is distributed and aimed as desired by
adjusting the windshield air nozzle in the pedal
console and by an adjustable air vent on the
seat console.
Fig. 13-Driver's seat
Fig. 14-Heating
TC35-03-15
30
Fig. 15-Operation
To Next Page
Loading...
Need help?
General
