Care and Maintenance 7
TC29
51
7 Care and Maintenance
7.1 General notes
The good operating condition and life expectancy
of machines are largely influenced by care and
maintenance.
For this reason, it is in every machine owner’s
interest to perform the specified maintenance
work and comply with the service intervals. This
Section deals in detail with periodic maintenance,
inspection and lubricating tasks.
The type-specific maintenance and inspection
plan lists all work to be performed on the machine
at regular intervals. Maintenance and inspection
plans for this purpose are contained in every
instruction book.
It is essential that the recommendations in
Chapter 2, "Safety and Prevention of
Accidents" are observed.
7.2 Intervals
First inspection once before first putting into operation Chapter 7.8.1
Daily jobs every 10 op. h* or every work shift
1)
Chapter 7.8.2
Weekly jobs weekly or after 50 op. h*
1)
Chapter 7.8.2
100 operating hours once after first putting into operation
2)
Chapter 7.8.4
Every 500 operating hours after every 500 operating hours Chapter 7.8.4
Every 1000 operating hours after every 1000 operating hours Chapter 7.8.4
1)
whichever comes first
2)
also applicable when new or overhauled diesel engines are put into operation
To Next Page
Loading...
Need help?
General
