Operation 4
TC29
29
4 Operation
4.1 First commissioning
If you are not familiar with the operator controls and
display elements of this machine, read this chapter
carefully before operating the machine.
This chapter describes all the functions.
Before putting the machine into motion and
operation you must familiarize yourself thoroughly
with the display elements and operator controls.
Before the machine is placed into operation, it must
be subjected to a thorough visual inspection each
time. Take care to ensure that there is no damage
and that there are no loose or missing screws, oil
deposits, or oil/fuel leaks. Any defects must be
remedied immediately. In the event of defects
which jeopardize operating safety, the machine
must not be placed into operation until these have
been eliminated.
Before placing the machine into operation, the
inspections outlined in Chapter 7.5 must be carried
out each time.
To Next Page
Loading...
Need help?
General
