Care and Maintenance 7
TC29
55
7.8 Checking, maintenance and inspection plans
7.8.1 Initial inspection (delivery/ handing-over inspection)
HR14-03-41
6
7
Fig. 41 Initial inspection
Jobs to be carried out by trained specialist dealer personnel.
Chapter
1 Check whether machine-specific instruction book is in the machine --
2 Check engine oil level 7.9.1
3 Check hydraulic oil level 7.9.8
4 Check fuel level 7.9.4
5 Check coolant level 7.9.3
6 Oil check: crawler gear units 7.9.12
7 Check crawler chain tension 7.9.14
8 Battery: fluid level and charge condition 7.9.18
9 Grease machine (all lubricating points) 7.8.3
10 Test run, hydraulic function check and test work --
11 Visual inspection for tightness of all hoses, pipes, cylinders, etc. --
12 Check function of electrical indicating and warning elements, and the lighting system --
13 Initial delivery/ handing-over certificate and return to manufacturer --
To Next Page
Loading...
Need help?
General
