Care and Maintenance 7
TC29
57
Daily Chapter
1 Check hydraulic oil level 7.9.8
2 Check engine oil level 7.9.1
3 Check fuel level (fuel gauge on instrument panel) 7.9.4
4 Check water level for windshield wiper 7.9.17
5 Check the crawler chain tension of the rubber crawlers 7.9.14
6 General visual inspection for material cracks, external damage, completeness, etc. --
7 Check for leaks in:
pipes, hoses, control valve, hydraulic pumps, cylinders, etc.
--
When tightening hose and line connections, the screw-in couplings must be
locked to prevent rotation.
8 Check electrical indicating and warning elements, and the lighting system --
9 Check smooth running of operator controls --
10 Grease machine in compliance with overview of lubricating points 7.8.3
Weekly Chapter
11 Clean cooling fins of the water cooler and the hydraulic oil cooler 7.9.3
The cleaning intervals should be shortened if there is high exposure to dust!
7.9.9
12 Check if there is water and/or dirt in the fuel line water separator and clean if required. 7.9.4
13 Check coolant level 7.9.3
14 Clean dust ejection valve on air filter 7.9.5
The cleaning intervals should be shortened if there is high exposure to dust!
15 Check the function of the front window --
16 Check that door catches function perfectly --
17 Check the crawler chain tension of the steel crawlers 7.9.14
18 Check bearing bushings and bolts of the work equipment --
19 Check function, condition and completeness of safety devices, e.g. exit barrier, etc. --
20 Grease machine in compliance with overview of lubricating points 7.8.3
To Next Page
Loading...
Need help?
General
