Terex TC29 User Manual

Care and Maintenance 7
TC29
61
O = Checking, maintenance
X = Replacement
Operating hours
min.
2x
min.
1x
Perform work with machine at operating temperature
after
100
every
500
every
1,000
yearly yearly
Chapter
24 Check electrical indicating and warning elements,
and lighting system
O O
--
25 Check smooth running of operator controls and
adjust if necessary
O O
--
26 Check tightness of all pipes, hoses, control valve,
hydraulic pumps, cylinders, etc.
O O
--
When tightening hose and pipe connections,
screw-in couplings must be locked to
prevent rotation.
27 Check or change hydraulic oil
O O X
2)
X
7.9.8
28 Replace hydraulic oil return filter insert
X X X
7.9.10
29 Replace breather
X X
7.9.11
30 Crawler gear units: Check or replace oil
X O X X
7.9.12
31 Check that swing gear unit is securely fastened
O O O
7.9.15
32 Check that ring gear attachment screws are securely
fastened
O O O
7.9.15
33 Grease machine in compliance with overview of
lubricating points
O O
7.8.3
34 Check function, condition and completeness of
safety equipment
O O
--
35 Function of brake valves
O O
7.9.13
36 Hydraulic function check with pressure function test
O O
--
37 Test run and test work
O O
--
38 Initial inspection card and return to manufacturer
O
O
3)
7.4
1) at least every 2 years
2) Extension of oil change interval in compliance with oil sample analysis and lab report
For further information see Chapter 7.3
3) within warranty

Terex TC29 Specifications

General

Brand	Terex
Model	TC29
Category	Excavators
Language	English