Technical data 3
TW85 25
3.9.2 Consumable specifications
Stipulated consumables for Central
Europe
Application
Code designation
acc. to Bi
1)
Designation
Specification,
standards, quality
Remarks
Engine -- Diesel fuel EN 590
ASTM D975 1-D / 2-D
Before using RME fuels
(rape oil methyl ester), it is
essential to consult your
responsible Terex dealer for
further details.
Engine EO 1540 A Engine oil
SAE 15W-40
API CF4
See also engine manufacturer’s
instructions
Cooling for engine SP-C Coolant
Antifreeze based on
ethylene glycol
See also engine manufacturer’s
instructions
Hydraulic system HYD 1040
Hydraulic oil or
multi-grade
engine oil
HVLP 46
or
SAE 10W-40
The following viscosity limit
values must be kept (according
to ASTM 445)
at 100° C min. 8 mm
2
/s (cSt)
at -10° C approx. 1,500 mm
2
/s (cSt)
BIO-E-HYD-HEES
Bio-degradable
hydraulic oil
based on
synthetic ester
Filling according to
customer
specifications. Brand
label on machine.
Do not mix bio-
degradable oils of
different manufac-
turers.
The same viscosity specifications
apply as for mineral hydraulic
oils.
When changing from
mineral to biodegradable
hydraulic oils, the tank and
hydraulic system must be
completely drained, cleaned and
flushed.
For further details before
changing oils, please consult
your responsible Terex
dealer.
Axles,
transmission
GO 90 LS Gearbox oil SAE 85W-90LS
API-GL 5
Alternative recommendations
SAE 90LS
SAE 80W-90LS
Lubricating points MPG-A
Multi-purpose,
lithium-soap
based grease
K2K-30
DIN 51825
1) In conformity with the regulation lubricants of the Main Association of the German Building Industry e.V.
Alternative recommendation for other temperature ranges
Engine oil
In compliance with API CG 4 or CF 4 and
in compliance with ACEA E3 or E2
Hydraulic oil
In compliance with DIN 51524.T3 HVLP
-30
-22
-20
-4
-10
14
0
32
10
50
20
68
30
86
°C
°F
Umgebungstemperatur/Ambient temperature/Température ambiante
0W-30
0W-40
5W-30
5W-40
10W-30
10W-40
15W-40
20W-50
Viskode
To Next Page
Loading...
