Maintenance and care 7
TW85 65
7 Maintenance and care
7.1 General notes
The good operating condition and life expectancy
of machines are largely influenced by care and
maintenance.
For this reason, it is in every machine owner’s
interest to perform the specified maintenance
work and comply with the service intervals. This
chapter deals in detail with periodic maintenance,
inspection and lubricating tasks.
The type-specific maintenance and inspection
plan lists all work to be performed on the machine
at regular intervals. Maintenance and inspection
plans for this purpose are contained in every
Instruction Book.
It is essential that the recommendations in
chapter 2, “Safety and Accident Prevention”,
are observed.
7.2 Intervals
Initial inspection Once before first putting into operation Chapter 7.8.1
Daily tasks Every 10 operating hours or every shift
1)
Chapter 7.8.2
Weekly tasks Weekly or after 50 operating hours
1)
Chapter 7.8.2
100 operating hours Once after first putting into operation
2)
Chapter 7.8.4
Every 500 operating hours After every 500 operating hours Chapter 7.8.4
Every 1,000 operating hours After every 1,000 operating hours Chapter 7.8.4
Every 2,000 operating hours After every 2,000 operating hours Chapter 7.8.4
1)
The first date to arrive always applies
2)
also applicable if new or overhauled diesel engines are put into operation.
To Next Page
Loading...
