4 Operation
38 TW85
• If the low hydraulic oil display (12/31) lights up,
stop the machine immediately and switch off
the engine. Refill with hydraulic oil, determine
the cause if necessary.
• If the permitted coolant temperature (12/41) is
exceeded, stop work, open the engine hood
and keep the engine running at idle speed to
allow it to cool down. Once the engine has
cooled down, turn it off and determine the
cause of overheating, or call for service
personnel.
• When the fuel reserve is reached (12/43) there
are still approx. 13 litres of fuel in the tank.
There is a brief acoustic warning.
Refuel the machine.
• If the brake accumulator pressure indicator
(12/39) lights up, stop the machine and
determine the cause.
The machine may not be operated with
insufficient brake accumulator pressure.
Danger of accident!
No braking power!
4.2.3 Switching off the engine
Do not switch the engine off when
running at full throttle, but allow it to run
for a short time at low revs without load.
• Turn the ignition key (12/48) to Position "0".
• The engine stops automatically.
0
4/4
,
!
P
HM32-012
41
26
39
28
29
30
31
48
43
Fig. 12 Operation