TESTO 340 - Memory Management; Folder Management

E.5 Memory
All readings are allocated to the location that is activated at the time and can be saved in
the Flue gas menus. Unsaved readings are lost when the measuring instrument is swit-
ched off.
Folders and locations can be created (max. 100 folders, max. 10 locations per folder),
edited and activated and measurement protocols can be printed.
The special function
Extras memory can be used to display the remaining free memory
space. All protocols can be printed or deleted. The entire memory (folders and locations
incl. protocols) can also be cleared.
Calling up the function:

Memory  .
E.5.1 Folders
Creating a new folder:
Folders are given a unique identification via the folder number. A folder number can only
be allocated once. The folder number cannot be changed afterwards.
1
New Folder  .
2
Select
Folder Number  .
3
Enter values 
OK Save input .
4
Repeat steps
2
and
3
for the other criteria as required.
5
.
Ordering the folders list:
1
Folders list.
2
Select the order criterion: , , .
Restoring the folders list:
Order the list in the sequence in which the folders were created:
Restore list  .
Editing folders:
Select the folder.
Options:
Delete the folder: .
Edit the folder: .
Edit
Del
OK
Addr’NameFolder
OK
OK
change
OK
OK
E. Operation
22