TESTO 340 - Instrument Settings; Display Edit Options

F.1 Instrument settings
F.1.1 Display edit
The parameters/units and the display representation (number of readings displayed per
display page) can be set.
Available parameters and units (may vary from one instrument to another):
Display Parameter Units
ΔΔ
P2 Differential pressure (200hPa) mbar, hPa, Pa
mmWS, inW
psi, inHG
Gasfl Gas flow rate m
3
/h, l/min
GasP Gas burner output kW
OilFl Oil flow rate kg/h
Oil p Oil pressure bar
OilP Oil burner output kW
Pabs Absolute pressure hPa, mbar, Pa,
mmWS, inW
psi, inHG
Pump Pump output l/min
ΔΔ
P1 Differential pressure (40hPa) mbar, hPa, Pa
mmWS, inW
psi, inHG
Speed Flow speed m/s, fpm
Flow Airflow m3/s, m3/m,
m3/h, m3/d,
m3/y, f3/s,
f3/m, f3/h,
f3/d, f3/y,
l/min
MCO, MNOx, Mass flow kg/h, kg/d, t/d,
MSO2 t/y, lb/h
H2 Hydrogen ppm
Display Parameter Units
FT Flue gas temperature °C, °F
AT Ambient temperature °C, °F
CO2 Carbon dioxide %
O2 Oxygen %
CO Carbon monoxide ppm, %, g/GJ
mg/m
3
, mg/kW
uCO Carbon monoxide undiluted ppm
NO Nitrogen monoxide ppm, %, g/GJ,
mg/m
3
, mg/kW
NOx Nitrogen oxide ppm, %, g/GJ,
mg/m
3
, mg/kW
AT Ambient temperature °C, °F
Drght Flue draught mbar, hPa,
mmWS, inW,
Pa, psi, inHG
SO2 Sulfur dioxide ppm, %, g/GJ
mg/m
3
, mg/kW
NO2 Nitrogen dioxide ppm, %, g/GJ
mg/m
3
, mg/kW
Itemp Instrument temperature °C, °F
DP Flue gas dew point °C, °F
temperature
Effn Effency referred to net %
calorific value
Effg Effency referred to gross %
calorific value
ratio Poison index -
ExAir Air ratio %
F. Configuration
27