TESTO 340 - Fuel Selection and Settings; Activating Fuel Type; Setting Fuel Coefficients

F.3 Fuels
The fuel can be selected. The fuel-specific coefficients can be set. Ten fuels can be set
for each customer.
Calling up the function:

Fuels  .
Activating fuel:
Select the fuel  .
Setting coefficients:
1
.
Option:
To reset all coefficients to default values:
Default values  .
To change the name of the fuel (only possible with customer-specific fuel):
Name 
 Set the values  .
2
Select the coefficient
Option:
To reset the chosen coefficients to default values: .
3
 Set the values  .
4
OK Save input .
The calculation of the fuel factors is carried out via the testo easyEmission software.
OK
OKChange
Deflt
OKChange
OK
Coeff.
OK
OK
F. Configuration
35