TESTO 340 - Start Keys Assignment; AutoOff Function Settings

F.1.3 Start keys edit
The assignment of the function keys depends on the function that is selected. Only the
function keys in the start screen (shown when the measuring instrument is switched on)
can be assigned any function from the
Measurements menu.
The function keys are only active if the required sensors are connected.
Calling up the function:

Inst’ settings Start keys edit  .
Assigning functions to the start keys:
1
Select function  Press the function key that is to be assigned the selected function.
2
Repeat step
1
for the other function keys as required.
Saving settings:
OK Save input .
F.1.4 AutoOff
With the AutoOff function active, the instrument switches itself off automatically if no key
is pressed after the set period of time.
Calling up the function:

Inst’ settings AutoOff  .
Switching AutoOff on and off:
Select
Auto Off select On or Off  .
Setting the AutoOff time:
Select
Time Set the value  .
OKChange
OKChange
OKOK
OK
OKOK
F. Configuration
29