TESTO 340 - Display Settings Overview; Sensor Settings Overview; Recalibration Overview

Task Call/function see page
 Memory
Print all protocols in the memory Print all data  22
Delete all protocols in the memory Delete all data  22
Clear whole memory (protocols and locations) Delete memory  22
 Inst’ settings 
Set reading display  Display edit  27
Select printer, set print text  Printer  27
Set function key assignment, start screen  Start keys edit  27
Set date/time  Date/Time  27
Set language  Language  27
Set automatic instrument disconnect  AutoOff  27
 Sensor settings 
Display calibration data Calibration data  31
Set NO2 addition NO2 addition  31
Set O2 reference O2 reference  31
Set sensor protection Sensor protection  31
Display ppm/hour counter ppm/hour counter  31
Perform recalibration Recalibration  31
 Fuels 
Activate fuel Select fuel  35
Change fuel coefficients Select fuel  35
-or -  Inst’ diagnosis 
Perform gas path check Gas path check  26
View instrument errors Error diagnosis 26
View sensor diagnosis Sensor diagnosis  26
OK
OK
OK
OK
Coeff.
OK
OK
OK
OK
OK
Change
Change
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
Extra
Functional overview
61