DSM Installation and Configuration Guide
Copyright 2009 - 2020 Thales Group. All rights reserved.
9
Configuring Date and Time Settings with NTP Enabled 149
Configuring Date and Time Settings with NTP Disabled 149
Configuring Users Settings 149
Configuring IPMI GUI Port Settings 150
Configuring Fan Settings 151
Remote Control 151
Console Redirection 151
Power Control 152
Using Active Directory with IPMI GUI 152
Configuring AD groups 152
Configuring the AD Server 152
Configuring LDAP Server 153
Configuring LDAP Settings on IPMI 153
Maintenance Firmware Update 154
Prerequisite 154
Upgrading the firmware 154
Reset the Firmware 154
Restore the IPMI Configuration from a Backup File 155
Server Health 155
Best Practices after IPMI is Configured 156
Replace the default certificate with a Web Server Certificate 156
Change the port through which you access IPMI 157
Change the IPMI password 158
Creating IPMI users 158
To create an IPMI user: 158
Configuring Alerts 159
Configure SMTP (optional - for e-mail alerts) 159
Configure an IPMI Alert (for SMTP and/or SNMP alerts) 159
Restrict inbound traffic to IPMI through IP Access control 160
Reset Default Configuration Settings 160
DSM IPMI CLI Commands 161
ip 162
ip set 162
ip delete 162
ip show 162
mask 163
mask set 163
mask delete 163
mask show 163
gateway 163
To Next Page
Loading...
