Appendix C: IPMI
Configuring IPMI Network Settings
DSM Installation and Configuration Guide
Copyright 2009 - 2020 Thales Group. All rights reserved.
149
8. The Network Link Status displays the status, speed, and duplex type for the dedicated and shared network links.
Select an appropriate link.
9. Click Save to save the Network settings.
Configuring Date and Time Settings with NTP Enabled
This feature allows you to configure the time/date settings for the host server and the agent.
You can either set the date and time manually or use the NTP server to set date and time. Follow the instructions
below to set date and time using the NTP server:
1. In the Configuration submenu, select Date and Time to set the date and time settings.
2. Select NTP Enable to use NTP settings.
3. Select a time zone.
Time zone is enabled when NTP Enable is selected. The options are UTC -12:00 hr. to +12:00 hr.
4. Enter the IP address for the primary NTP server.
5. Enter the IP address for the secondary NTP server.
6. Select the daylight saving time (DST) option for the time to automatically adjust during DST.
7. Click Refresh to display the current date/time.
8. Click Save to save the entries.
Configuring Date and Time Settings with NTP Disabled
Follow the instructions below to set date and time manually:
1. In the Configuration submenu, select Date and Time to set the date and time settings.
2. Select NTP Disable to use NTP settings.
3. Enter the date.
4. Enter the time in hh/mm/ss format.
5. Select the daylight saving time (DST) option for the time to automatically adjust during DST.
6. Click Refresh to display the current date/time.
7. Click Save to save the entries.
Configuring Users Settings
This Users page displays information on the current users. You can add, delete or modify user information. In this
section, you assign Network Privileges based on a role: User, Operator or Administrator. The following table describes
the access for each role for each function.
Function User Operator Administrator
System Information Full Access Full Access Full Access
Chassis Locator Control View Only Full Access Full Access
FRU Reading Full Access Full Access Full Access
To Next Page
Loading...
