Luna SA HSM
Troubleshooting
DSM Installation and Configuration Guide
Copyright 2009 - 2020 Thales Group. All rights reserved.
111
Troubleshooting
Partitions
On the Luna, if you want to change the partition that a DSM Cluster is registered to, then you need to delete the original
partition. At the Luna type:
lunash:> partition delete -partition <partitionName>
Logs
When a Luna in a DSM cluster is down or not accessible, no audit logs / syslogs / email notifications are generated on
the DSM. Therefore, to ensure proper notification for issues, configure syslog on the Luna. Refer to the Luna
documentation for information on configuring syslogs.
To Next Page
Loading...
