Appendix A: Specifications, Racking, and Cabling for the V6000 and V6100
DSM Hardware Appliance Specifications
DSM Installation and Configuration Guide
Copyright 2009 - 2020 Thales Group. All rights reserved.
124
Informational LEDs
Status Description
Solid red An overheat condition has occurred.
(This may be caused by cable congestion).
Blinking red (1Hz) Fan failure, check for an inoperative fan.
Blinking red (0.25Hz) Power failure, check for a non-operational power supply.
Solid blue Local UID has been activated. Use this function to locate the server in a rack mount
environment.
Blinking blue (300
msec)
Remote UID is on. Use this function to identify the server from a remote location.
DSM Hardware Appliance Specifications
Specification Description
Chassis 1U rack mountable; 17’ wide x 20 1/2” long x 1.75” high
Weight V6000: 21.5 lbs (9.8 kg)
V6100: 22 lbs (10 kg)
Memory 16GB
Hard Drive Seagate Savvio 600GB mirrored
Serial Ports 1
Ethernet 2 x 1GB
IPMI 1 x 100Mb
Power Supplies 2 removable 80+ certified (100VAC-240VAC/50-60Hz) 400W
Chassis Intrusion Detection Yes
Maximum BTU 410 BUTU max
Operating Temperature 10° to 35° C (50° to 95° F)
Non-operating Temperature -40° to 70° C (-40° to 158° F)
Operating Relative Humidity 8% to 90% (non-condensing)
Non-operating Relative Humidity 5% to 90% (non-condensing)
Safety Agency Approval FCC, UL, and BIS certifications
FIPS 140-2 level 3 HSM V6100 only
Table A-1: V6000/V6100 Specifications
To Next Page
Loading...
