d. Select the burning speed
from the drop down list.
e. Select whether disc data
verification is required or
not.
f. Click “Burn” to start disc burning.
2. Write image file to disc
a. Click “Browser” and the NAS
share list will appear to
locate the desired image file to
burn.
b. Select the ISO file.
c. Select from the installed USB or SATA(for N6850/N8850/N10850) burning
devices. Please click the “detect disc” button to check the status once the
disc is inserted.
d. Select the burning speed from the drop down list.
e. Select whether disc data verification is required or not.
f. Click “Burn” to start disc burning.
To Next Page
Loading...
