THERA-Trainer TIGO - Page 41

41
Art. No.: A002-629_Rev 06
Last update: CW19/2018
THERA-Trainer tigo / THERA-Trainer veho - User manual
Functions of the control and display unit
START button Press button: THERA-Trainer starts countdown and begins the training
session.
The THERA-Trainer starts at 10 rpm.
STOP button Press button: THERA-Trainer pauses ongoing training session (-P-).
 Press button: THERA-Trainer stops current training session.
Control and display unit shows report of the training session.
 Press button again: THERA-Trainer indicates covered distance in km.
 Press button once again: THERA-Trainer indicates energy consumption
in kcal.
Training
parameters
display
 Indicates training parameters alternatingly during the training session.
Button
Number of
revolutions
 Press + button: Rabbit symbol flashes. THERA-Trainer gradually increases
the number of revolutions.
 Press - button: Rabbit symbol starts flashing. The THERA-Trainer gradually
reduces the number of revolutions.
 Press and hold the button: Increase or reduce number of revolutions
continuously until maximum or minimum is reached.
 Maximum number of passive revolutions: 60 rpm.
Button
Exercising
resistance
 Press + button: Weight symbol starts flashing. The THERA-Trainer gradually
increases exercising resistance.
 Press - button: Weight symbol starts flashing. The THERA-Trainer gradually
reduces exercising resistance.
 Press and hold the button: Increase or reduce exercising resistance
continuously until maximum or minimum is reached.
 Current exercising resistance is adjustable in 15 steps.
 Maximum exercising resistance:
– Leg exerciser: 22 Nm
– Upper body exerciser: 8 Nm
 Training resistance setting will remain constant within the entire rpm range.
 Higher pedalling frequency = higher performance.
Button
Training time
 Press + button: The Clock symbol flashes. THERA-Trainer increases training
time by one minute at a time.
 Press - button: The Clock symbol flashes. THERA-Trainer reduces training
time by one minute at a time.
 Press and hold the button: Increase or reduce training time continuously until
maximum or minimum is reached.
Button
Direction of
rotation
 Press button: Rotation direction arrow changes. The THERA-Trainer changes
direction. Yellow arrow indicates direction of rotation.
 The THERA-Trainer gradually reduces the number of revolutions to 0 rpm and
resumes movement in opposite direction with a pre-set number of revolutions.
 The yellow arrow indicates the direction of rotation currently set.
– Arrow up: forward direction of rotation
– Arrow down: backward direction of rotation