EasyManua.ls Logo

THERA-Trainer TIGO - Start-Up; Installing the THERA-Trainer

Default Icon
84 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
19
Art. No.: A002-629_Rev 06
Last update: CW19/2018
THERA-Trainer tigo / THERA-Trainer veho - User manual
8START-UP
8.1 Unpacking
Unpack the THERA-Trainer:
Remove the THERA-Trainer from packaging.
Check the THERA-Trainer incl. all accessories/options for transport damage.
Check if delivery is complete.
Inform supplier or forwarding agent immediately of any damage.
8.2 Set-up conditions
For safe and effective use, observe the following conditions.
Ambient conditions during use:
Temperature: 5 °C - 40 °C
Humidity: 15 % - 93 % Rh
Air pressure: 700 hPa - 1,060 hPa
Do not use THERA-Trainer in wet, humid or hot environments.
Only use the THERA-Trainer on even and slip-proof floors.
Do not use the THERA-Trainer for outdoor exercise.
8.3 Installing the THERA-Trainer
Installing the leg support
Fold up securing system 1 of leg support by foot rest.
Loosen knurled head screw 2.
Insert leg support 3 the right way around into slot of securing system.
Tighten knurled head screw.
WARNING!
Danger to life due to magnetic field!
Make sure that there is no direct body contact with the THERA-Trainer in the vicinity
of the pacemaker or defibrillator.
Maintain a safety distance of at least 5 cm.
WARNING!
Risk of injury due to missing cushion!
If no leg support is being used:
Fold securing system of leg support behind foot rest (secured by magnet).
1
3
2

Table of Contents