THERA-Trainer TIGO - Control and Display Unit 5.7; 7; 10.4 Errors

THERA-Trainer tigo / THERA-Trainer veho - User manual
72
Art. No.: A002-629_Rev 06
Last update: CW19/2018
18.2 Control and display unit with 5.7'' / 7'' / 10.4'' colour screen
E128 THERA-Trainer is overheated.
Switch off the THERA-Trainer.
Pull power plug.
Let the THERA-Trainer cool down for 20 minutes.
If error message occurs repeatedly:
Contact trained supplier.
E130 Control and display unit tigo/veho 2.7" wireless defective:
Contact trained supplier.
Replace control and display unit tigo/veho 2.7".
E131 Control and display unit tigo/veho 2.7" wireless defective:
Contact trained supplier.
Replace control and display unit tigo/veho 2.7".
E132 Control and display unit tigo/veho 2.7" wireless:
Contact trained supplier.
Replace control and display unit tigo/veho 2.7".
E134 Control and display unit tigo/veho 2.7" wireless:
Contact trained supplier.
Replace control and display unit tigo/veho 2.7".
Error code Troubleshooting
Error code Troubleshooting
Error 16
Pull power plug and plug it back in after approx. 5 s.
The THERA-Trainer restarts.
If error message occurs repeatedly:
Contact trained supplier.
Error 17 THERA-Trainer is overheated.
Switch off THERA-Trainer and pull power plug.
Let THERA-Trainer cool down for 10 min.
If error message occurs repeatedly:
Contact trained supplier.
Error 18
Pull power plug and plug it back in after approx. 5 s.
The THERA-Trainer restarts.
If error message occurs repeatedly:
Contact trained supplier.
Error 19
Contact trained supplier.
Error 20
Pull power plug and plug it back in after approx. 5 s.
The THERA-Trainer restarts.
If error message occurs repeatedly:
Contact trained supplier.
Error 21
Contact trained supplier.
Error 22
Pull power plug and plug it back in after approx. 5 s.
The THERA-Trainer restarts.
If error message occurs repeatedly:
Contact trained supplier.