27
Art. No.: A002-629_Rev 06
Last update: CW19/2018
THERA-Trainer tigo / THERA-Trainer veho - User manual
Retaining bracket 1 opens.
Put feet into foot rests.
Make sure that feet are correctly positioned in foot rests.
Press down foot fixing and secure feet.
Make sure that the user is able to remove the foot fixing without assistance
if necessary, or that an assistant is available.
Release foot fixing as follows:
Press down lightly on retaining bracket 1 and activate release lever 3
at the same time.
Retaining bracket opens.
Leg support
NoteThe leg support is mandatory for users suffering from paralysis, spasticity
or weak legs.
Apply leg support as follows:
Make sure that the THERA-Trainer is not in training mode.
Put feet into foot rests.
Make sure that feet are correctly positioned in foot rests.
Use velcro strap 1 to secure calves on leg support 2.
Make sure that the user is able to remove the velcro strap without assistance
if necessary, or that an assistant is available.
9.5 Upper body exerciser/safety handle
Upper body exerciser 1
Permits active or passive exercise for the entire upper body.
Changing the different types of therapy grips and arm rests allows the training
to be adapted to fit each user's individual needs.
Short upper body exerciser:
The short upper body exerciser is especially suitable for users with a short upper
body or a low seated height. The height setting is lower in comparison with the
upper body exerciser (see Setting height of upper body exerciser/safety handle).
Before starting the training with the upper body exerciser, pull out device base
at least 10 cm.
To Next Page
