25
Art. No.: A002-629_Rev 06
Last update: CW19/2018
THERA-Trainer tigo / THERA-Trainer veho - User manual
9.4 Foot fixing/leg support
Foot rests
Secure feet in foot rests as follows:
Make sure that the THERA-Trainer is not in training mode.
Secure feet exclusively when seated.
Make sure that feet are correctly positioned in foot rests 2.
Wrap velcro strap 1 tightly around instep of the foot.
Fasten velcro strap to outside of the foot rests.
NoteIf the foot fixing with a velcro strap is not sufficient for the user to exercise safely,
the manufacturer recommends using the foot fixing option.
Foot rests with 2-stepped radius adjustment
The crank radius can then be set to 75 mm or 110 mm.
NoteThe crank radius must only be set if necessary. The crank radius of 75 mm
is standard.
CAUTION!
Risk of injury through unprotected metal parts!
Do not remove foot rests for upper body exercise.
To Next Page
