THERA-Trainer tigo / THERA-Trainer veho - User manual
60
Art. No.: A002-629_Rev 06
Last update: CW19/2018
14.2 Biofeedback
Gives the user feedback on his course of movement during the training
session.
Shows the power difference between right and left leg in forward or backward
direction.
Shows how evenly the power is distributed between the arms moving
the crank, i.e. whether they are pushing and pulling to the same degree.
Exclusively for active exercise.
The leg exercise results will be falsified if
– the cranks are set to different radii.
– then user is not seated in the centre.
– the leg pushes and pulls.
Note The colours of the biofeedback display can be adjusted in the sub menu by
a trained supplier to accommodate users with red-green blindness (Basic settings/
Configuration).
Biofeedback for leg exerciser
Select illustration in sub menu:
– Symmetry bar
– Symmetry road
– Passive / muscle tone (also for upper body exercise)
Biofeedback can be deactivated in the relevant training programme via the sub
menu.
Symmetry bar
Bar diagram shows activity distribution between lower extremities.
The total of both bars is always 100%.
Symmetry road
Depending on the power distribution, a bike on the street illustration will
move to the left or to the right.
When the obstacle has been successfully avoided, it lights up in green.
To Next Page
