61
Art. No.: A002-629_Rev 06
Last update: CW19/2018
THERA-Trainer tigo / THERA-Trainer veho - User manual
Biofeedback “Passive”/muscle tone
Screen
shows movement of arms or legs with current motor power (bar) during
passive training.
gives information on muscle tone.
Maximum height of bar corresponds to 100% of the power set as motor power.
Value “START” indicates the average power provided by the motor during
the first minute of exercise.
The solid part of the bar and the percentage % at the bottom of the bar indicate
how many % of the set motor power is required to move the arms or legs.
The value indicated in Nm shows the motor power the THERA-Trainer has
to provide.
For leg exercise, a motor power of 22 Nm can be reached.
For upper body exercise, a motor power of 8 Nm can be reached.
Excentric exercise of legs or arms is possible when
– anti-spasm-control is deactivated.
– user works against drive power as much as possible.
NoteChanging the crank radius will influence this biofeedback illustration considerably.
The % values of two training sessions are comparable exclusively if crank radius
and maximum motor power settings (sub menu) are the same.
This biofeedback illustration does not give any scientifically relevant information,
it merely shows the user whether his muscles are relaxed or tense and how
muscle tone changes during a training session.
To Next Page
