56
CARE AND MAINTENANCE
INSPECTION AND SERVICE SCHEDULES
To ensure that your Thermo King unit operates reliably and economically over its full life, and to avoid limiting its warranty cover, the appropriate
inspection and service schedule must be followed. Inspection and Service intervals are determined by the number of unit operating hours and by the
age of the unit. Examples are shown in the table below. Your Dealer will prepare a schedule to suit your specific needs.
Note: T-500R has a different EMI to all other T-Series units and therefore must be presented at an authorised Thermo King dealer or service provider every 1000hrs
for full service.
For more specific detail, refer to the maintenance manual for your unit and to the Unit Operating Instructions in this manual.
SERVICE RECORD
Each inspection and service performed should be recorded on the Service Record Sheet found at the back of this Manual
Operating hours per year 1000 2000 3000
Full Service 12 months (1000 hours) 12 months (2000 hours) 8 months/ 2000 hours
Inspection 24 months/ 2000 hours 24 months/ 4000 hours 12 months/ 3000 hours
(continue as above) (continue as above) (continue as above)
To Next Page
Loading...
Need help?
General
