Thermo King T- series User Manual

60
SPECIFICATIONS
Engine Oil Pressure 138 to 345 kPa (20 to 50 psig) in low speed
276 to 414 kPa (40 to 60 psig) in high speed
Intake Valve Clearance 0.15 to 0.25 mm (0.006 to 0.010 in.)
Exhaust Valve Clearance 0.15 to 0.25 mm (0.006 to 0.010 in.)
Valve Setting Temperature 21 C (70 F)
Fuel Injection Timing 16 ± 1 degrees BTDC
Injection Nozzle Pressure 12,300 to 13,300 kPa (1784 to 1929 psig )
Low Oil Pressure Switch/Sensor 69 ± 14 kPa (10 ± 2 psig)—shutdown
High Coolant Temperature Sensor 104 ± 3 C (220 ± 5 F)—shutdown
Engine Thermostat 71 C (160 F)
Engine Coolant Type ELC (Extended Life Coolant), which is “RED”
Use a 60/40 concentration of any of the following equivalents:
Chevron Dex-Cool
Texaco ELC
Havoline Dex-Cool®
Havoline XLC for Europe
Shell Dexcool®
Shell Rotella
Saturn/General Motors Dex-Cool®
Caterpillar ELC
Detroit Diesel POWERCOOL® Plus
ENGINE (CONTINUED)

Thermo King T- series Specifications

General

Refrigerant	R-404A
Voltage	12V/24V DC
Defrost	Electric or Hot Gas
Model	T-series
Cooling Capacity	Varies by model
Power Source	Diesel Engine or Electric
Temperature Range	-29°C to 24°C
Control System	Microprocessor-based
Fuel Tank Capacity	Varies by model
Dimensions	Varies by model
Weight	Varies by model