Thomas 95 User Manual

1-16
CONTROL VALVE 1.3
1
C2376
C2377
C2378
C2379
9 Lubricate the spool O-ring shim with system oil and
install over spool seal. (fig. C2376).
10 Lubricate the section O-ring seal with system oil and
install to the lock adapter assembly. (fig. C2377).
11 Figure C2378 shows the completely resealed lock
adapter assembly ready to be installed to the control valve
assembly.
Section O-ring seal
Disassembly / Repair (cont’d)
12 Remove the screws retaining the spring return caps to
the control valve assembly. (fig. C2379). Remove the
spring return assemblies.
Lock adapter assembly
Spool O-ring shim
Remove screws

Thomas 95 Specifications

General

Brand	Thomas
Model	95
Category	Compact Loader
Language	English