THOMSON MEC 310#GENSET CONTROLLER User Manual

MEC 310 GENSET CONTROLLER
PM075 REV 2 09/08/20 Page 97 THOMSON TECHNOLOGY
4380 0-20 4-20mA 3.1
No. Setting Min. setting Max. setting Factory
setting
4381 0(4)-20mA 3.1 Set point 4mA 20mA 10mA
4382 0(4)-20mA 3.1 Delay 0.0 s 100.0 s 5.0 s
4383 0(4)-20mA 3.1 Output A R0 (none) R26 (relay 26) R0 (none)
4384 0(4)-20mA 3.1 Output B R0 (none) R26 (relay 26) R0 (none)
4385 0(4)-20mA 3.1 Enable OFF ON OFF
4386 0(4)-20mA 3.1 Fail class See description of fail classes
4390 0-20 4-20mA 3.2
No. Setting Min. setting Max. setting Factory
setting
4391 0(4)-20mA 3.2 Set point 4mA 20mA 10mA
4392 0(4)-20mA 3.2 Delay 0.0 s 100.0 s 5.0 s
4393 0(4)-20mA 3.2 Output A R0 (none) R26 (relay 26) R0 (none)
4394 0(4)-20mA 3.2 Output B R0 (none) R26 (relay 26) R0 (none)
4395 0(4)-20mA 3.2 Enable OFF ON OFF
4396 0(4)-20mA 3.2 Fail class See description of fail classes

THOMSON MEC 310#GENSET CONTROLLER Specifications

General

Brand	THOMSON
Model	MEC 310#GENSET CONTROLLER
Category	Controller
Language	English