MEC 310 GENSET CONTROLLER
PM075 REV 2 09/08/20 Page 77 THOMSON TECHNOLOGY
After this, dial-up can be used: Click on the telephone button.
TPS 300 software communication safety
If the communication fails, the MEC 310 unit will operate according to the received data. If e.g. only
half of the parameter file has been downloaded when the communication is interrupted, the settings
are going to be a mix.
The modem communication is very much slower than the normal direct
connection, so please be patient. It is
not recommended to download the entire
setting list. Use single setting downloads.
To Next Page
Loading...
