MEC 310 GENSET CONTROLLER
PM075 REV 2 09/08/20 Page 10 THOMSON TECHNOLOGY
The multi-functional inputs can be configured to cover the following functions:
-
VDO sensor input
-
0…20mA input
-
4…20mA input
-
Binary input with the possibility of cable supervision
Tacho RPM input (MPU) can be configured to cover the following functions:
-
Magnetic pick-up (2-wire)
-
NPN or PNP pick-up*
* These RPM inputs require external equipment.
Tacho RPM input with capacitor (M/L) can be configured to cover the following functions:
-
Magnetic pick-up (2-wire)
-
W terminal on charger alternator
-
NPN or PNP pick-up*
* These RPM inputs require external equipment
The generator voltage and current input can be configured to the following:
-
Voltage 100…25000V primary
-
Current 5….9000A primary
To Next Page
Loading...
