Foreword
Contents
4
1 General Information 5
51.1 Safety
61.2 Ordering Codes and Accessories
2 Getting Started 7
72.1 Parts List
72.2 Operating Principle
92.3 Operating Elements
3 External Connections ITC8xxx 11
123.1 Laser Diode Controller
133.1.1 Connecting the Laser and Monitor Diodes
133.1.2 Connecting Interlock and Status Display
153.2 Temperature Controller
163.2.1 Connecting a Thermistor
163.2.2 Connecting an AD590
163.2.3 Connecting a LM335
163.2.4 Connecting a TEC Element
173.2.5 Polarity Check of the TEC Element
173.2.6 Connecting the Status Display LED
4 External Connections ITC8xxxDS15 18
194.1 Connecting the Laser and Monitor Diodes - ITC8000DS15
194.2 Connecting Interlock and Status Display - ITC8000DS15
204.3 Connecting a Thermistor - ITC8000DS15
204.4 Connecting an AD590 - ITC8000DS15
204.5 Connecting a LM335 - ITC8000DS15
214.6 Connecting a TEC Element - ITC8000DS15
5 Optimization of Temperature Control 22
225.1 Principle Setup and Function
235.2 PID Adjustment
6 Operating Instruction 24
246.1 Pre-Settings
256.2 Functions in the Main Menu
276.3 Functions in the Channel Menu
276.3.1 Display
296.3.2 Changing Parameters
296.3.3 Selecting the Polarity of the Laser and the Monitor Diodes
296.3.4 Calibration of the Monitor Diode
306.3.5 Bias Voltage for the Monitor Diode
To Next Page
Loading...
Need help?
General
