TiVo Stream - Page 46

TiVo Stream System Information
42 TiVo Stream Operator’s Guide v1.1 • TiVo
®
Proprietary and Confidential
Table 3–5 describes the fields on the System Information Clients tab.
Figure 3–28 shows the Clients tab buttons for the TiVo Stream System Information web page when
the mobile device is not streaming or downloading programs.
Figure 3–28: TiVo Stream System Information web page (Clients tab: no streaming)
Table 3–5: TiVo Stream System Information web page (Clients tab)
Field Description
Release All Clients on This Device Frees up transcoding contexts on the current mobile device if they failed
to clear by themselves. If done when the device is streaming, the
streaming ends.
The Release All Clients On This Device button works only when pressed
on the streaming device’s web browser. It passes the IP addresses of the
device showing the web page to the TiVo Stream and uses that IP address
to look up the streaming sessions. If you tap
Release All Clients On
This Device
when looking at TiVo Stream System Information from a
different computer, the button does nothing.
Release All Clients on All Devices Frees up transcoding contexts on all mobile devices if they failed to clear
by themselves. If done when the devices are streaming, the streaming
ends.
Context For internal TiVo use only.
Client Type Identifies type of mobile device and the quality setting for current Stream.
Network Address IP address of the mobile device.
Session ID For internal TiVo use only.
Recording Current recording being streamed or downloaded—displayed in the
format: [DVR TSN]:[Program ID]
Target Bit-rate Transcoded bit-rate.
Current Segment Current segment of program being transcoded.
Encrypted HLS Indicates whether the current Stream device is being encrypted with
HTTP Live Streaming (HLS).