TKH Group Security Solutions HSD820v2H3-E - Accessing the Web Interface; System Requirements and Initial Connection

4 Access the webpages
The webpages of the HSD820v2H3-E offer a user-friendly interface for configuring the settings
of the unit and viewing live video images over the network. This chapter explains how to
connect to the built-in web server.
In This Chapter
4.1 System requirements............................................................................................ 15
4.2 Connect via web browser....................................................................................... 16
4.3 Find the unit with Device Manager...........................................................................16
4.4 Change network settings with Device Manager..........................................................17
4.5 Log on to the unit................................................................................................. 18
4.6 Install Viewer....................................................................................................... 19
4.7 The HSD820v2H3-E web interface........................................................................... 20
4.1 System requirements
You can log on to the web interface of your HSD820v2H3-E unit from a PC which is on the
same subnet as the unit. The browsing PC must meet the system requirements given in the
table below and the browser must support ActiveX controls. Make sure that your PC has a
good network connection.
Item System requirement
Personal computer Minimum
1. Intel
®
Core™ i5-2430M @ 2.4 GHz
2. 4 GB RAM
Recommended
1. Intel
®
Core™ i7-870 @ 2.93 GHz
2. 8 GB RAM
Operating system Windows 7 or higher
Web browser Internet Explorer
Network card 10Base-T (10 Mbps), 100Base-TX (100 Mbps) or 1000Base-T
(1000 Mbps) operation
Viewer ActiveX control plug-in for Microsoft IE
15