TKH Group Security Solutions HSD820v2H3-E - Change Network Settings with Device Manager

Connect to a device via Device Manager
4.4 Change network settings with Device Manager
With Device Manager, you can directly change the network settings of the HSD820v2H3-E.
To assign a static IP address
1 Go to the list of detected devices, and then right-click the entry for the HSD820v2H3-E.
2 Click Change Network Settings.
3 In Change Network Settings, click Static IP.
4 Provide the camera with an appropriate IP address, netmask, and gateway address for
the desired network configuration, and then click OK.
5 In the pop-up window indicating that you have successfully changed the settings, click
OK.
6 Wait one minute, and then rescan the network.
7 To access the webpages of the HSD820v2H3-E, double-click its entry in the list of found
devices.
Access the webpages
17