HSD820v2H3-E cameras support 256 preset points.
To set a preset point
1 On the PTZ&IMAGE tab, click Preset in the menu on the left.
2 Position the pointer on the live view pane.
3 Keeping the left mouse button pressed, move the camera to the desired view by
dragging the (red) pointer.
4 Using the buttons under the live view pane, adjust the fine zoom/focus ratio.
5 Click to open the Num list, and then assign a number to the current camera position.
Numbers 1-256 are accessed with the PrePage and NextPage buttons.
6 In the Name text box, enter a descriptive name.
7 To save these settings, click Set.
To move the camera to a specified preset point
1 On the PTZ&IMAGE tab, click Preset in the menu on the left.
2 Under Preset go, click to open the Presetlist.
Numbers 1-256 are accessed with the PrePage and NextPage buttons.
3 Select the desired preset point.
The camera moves to the target position.
To delete a preset point
1 On the PTZ&IMAGE tab, click Preset in the menu on the left.
2 Under Preset setting, click to open the Num list.
Numbers 1-256 are accessed with the PrePage and NextPage buttons.
3 Select the preset point you wish to delete.
4 Click Delete.
PTZ&IMAGE
81
To Next Page
Loading...