viii Tolomatic User Guide: ICR Rod Style Integrated Control Actuator
HEALTH AND SAFETY REGULATIONS
Personal Safety
During normal operation the actuator can become hot, especially the motor housing.
It is highly recommended to display proper safety notices and implement proper
safety measures to prevent contact with hot surfaces. In addition, the case ground
should be tied to an earth ground to prevent the presence of case voltage.
Handling and Unpacking
When unpacking and handling the actuator, care should be taken not to drop the
actuator as this can damage the connectors, internal electronics, or knock the
actuator out of alignment. Since this is an electromechanical device, proper ESD
measures should be taken to avoid static electricity from contacting the signal and
power lines of the device.
To Next Page
Loading...