Tolomatic SmartActuator Series - Optional Communications Cable; Figure 3-5 ICR;ICM SV1 P Plus Optional Communications Cable

3-4 Tolomatic User Guide: ICR Rod Style Integrated Control Actuator
3 : ICR/ICM SV1P PLUS - ELECTRICAL INTERFACE, SPECS & WIRING
3.1.3 Optional Communications Cable
A communications cable is available as an option with the ICR/ICM SV1P Plus
actuator and can be used for daisy chaining a series of actuators together to a PLC,
PC, HMI, or other intelligent device.
CABLE TOLOMATIC PART NO.
Communication Cable: 1 Meter 3604-1659
Communication Cable: 5 Meter 3604-1660
Figure 3-5: ICR/ICM SV1P Plus Optional Communications Cable
When cutting these cables for CANopen or DeviceNet connections, follow these
wiring guidelines.
Wiring for CANopen Wiring for DeviceNet
3 - Black, V- (CAN Ground) 1 - Drain, Shield
4 - White, CAN High 2 - Red, V+
5 - Blue, CAN Lo 3 - Black, V- (CAN Ground)
4 - White, CAN High
5 - Blue, CAN Lo
Ø .57
[ 14.5 ]
2.02
[ 51.3 ]
1.84
[ 46.7 ]
1M AND 5M LENGTHS
Ø .57
[ 14.5 ]
FEMALE
MALE
M12 X 1